PAGE 1 1390600_IN Rev D • Questions? (800) 234-6992 • ReeseBrands.comPAGE 1
ENGLISH
INSTALLATION INSTRUCTIONS
1. Pull the release lever as shown in Fig. 1 and lift the handle as shown in Fig. 2.
2. Adjust the length and tension of the cargo bar by moving the handle up and down repeatedly.
3. Once the footpads fit securely against the vehicle walls, pull lever and place handle down to lock. Fig. 1.
4. To collapse cargo bar for storage, pull lever and lift the handle to the fully open position. Fig. 2.
Inner tube will now slide freely. Pull lever and place handle down to lock. Fig. 1.
INSTRUCTION GUIDE FOR:
RATCHETING CARGO BAR
1390600
Date of Purchase: / /
Fig. 1
Pull Lever
WARNING
These instructions contain IMPORTANT safety information. Please read and keep for future reference.
Review all Warnings, Instructions, and Warranty information carefully. Failure to
follow these warnings and instructions will void the Warranty.
For assistance with this product or to order replacement parts, please contact:
Horizon Global
47912 Halyard Drive Suite 100, Plymouth, MI 48170
(800) 234-6992
Or visit www.ReeseBrands.com
Fig. 2
Release
Lever
Handle
The user must read and understand these Instruction Sheets and the Warranty.
Installation is the end user’s responsibility and beyond Horizon Global’s control. Therefore, Horizon Global exclusively limits its Warranty to the
repair or replacement of a defective product. Damage to your vehicle, your cargo or any person or property is excluded.
• DO NOT use your ratcheting cargo bar for purposes other than those for which it was designed.
• Do not attempt to drill, weld, or modify your ratcheting cargo bar or any of the components.
• Your ratcheting cargo bar must be inspected for signs of wear, corrosion and fatigue before each use. DO NOT use if bent or deformed.
• Do not use your ratcheting cargo bar for personal restraint.
To Next Page
Need help?
General
