11
Maintenance
Do not wipe the product off with paint thinner, benzine or alcohol. Doing so could cause
deformation or cracking of parts and lead to product damage.
How to care for this product
(1) Wipe off stains such as finger prints
with the cleaning cloth.
How to care for this product when the product
is dirty
(1) Clean off any dirt.
Rinse the product with cold or lukewarm
water (35°C or below). If the product needs
further cleaning, wipe with a wrung out
cloth that has been soaked in water-diluted
detergent. After wiping, wash with water.
(2) Hold the product upright and shake
up and down to remove any water
remaining inside.
Some remaining water may leak from the
gaps of the rollers and the product itself.
However, this is not a problem with the
product.
To Next Page
Loading...
