Need help?Do you have a question about the Refco Combi and is the answer not in the manual?
General| Brand | Refco |
|---|---|
| Model | Combi |
| Category | Water Pump |
| Language | English |
Describes the visual feedback sequence on the pump's LEDs during startup.
Details pump status and corresponding alarm relay actions based on condensate levels.
Step-by-step guide to reconfigure the pump's alarm relay behavior using DIP switches.
Instructions for mounting the pump horizontally, showing correct/incorrect sensor placement.
Instructions for mounting the pump vertically, showing correct/incorrect sensor placement.
Further steps for horizontal installation, showing pump placement within an indoor unit.
Instructions for mounting the pump vertically, showing its placement relative to the unit.
Guide for connecting the sensor to the pump and routing the electrical wiring.
Detailed steps for connecting the pump and tubing in a horizontal indoor unit setup.
Visual guide to understanding the pump's operational status indicated by LED lights.
Detailed steps for connecting the pump and tubing in a vertical indoor unit setup.
Comprehensive table detailing various LED states and their corresponding operational meanings.
Instructions on how to safely replace the fuse in the condensate pump.
Chart showing corrected flow rates based on suction lift, discharge rise, and tubing length.
Formula provided for converting flow rates from Liters per Hour to US Gallons per Hour.
To Next Page
