Do you have a question about the Refco Combi 3004146 and is the answer not in the manual?
Brand | Refco |
---|---|
Model | Combi 3004146 |
Category | Water Pump |
Language | English |
Explains warning symbols and standards used in the manual for hazard communication.
Details the physical components and overall dimensions of the Combi condensate pump.
Lists and identifies all included accessories with their respective part numbers for easy reference.
Explains the function of LED indicators and alarm relay contacts based on pump status and condensate level.
Describes the meaning of various LED light patterns during different operational states of the pump.
Instructions for inspecting the pump for damage during transportation.
Specifies the recommended storage temperature and humidity conditions for the pump.
Illustrates installation positions and lists necessary tools for commissioning the pump.
Details initial steps for horizontal installation, including vent tube connection.
Details initial steps for vertical installation, emphasizing leaving the silicone plug in the water sensor.
Illustrates the process of connecting the power and alarm cables to the pump.
Details the final electrical connection steps and crucial safety warnings regarding power and installation.
Shows the final steps and routing for a horizontal installation, including drain connection.
Shows the final steps and routing for a vertical installation, including drain connection.
Illustrates wiring for a specific setup where the indoor unit powers the outdoor condenser.
Shows wiring diagrams for multi-split AC systems and explains alarm relay configuration.
Details wiring for a setup where the outdoor condenser is powered by the indoor evaporator unit.
Illustrates wiring for a simplified setup without an alarm circuit and warns about potential issues.
Explains how to clean or replace the water filter to ensure pump longevity.
Details the procedure for replacing the alarm relay fuse, including necessary ratings.
Addresses common issues like no lights, constant running, A/C off, alarm, dripping, noise, and LED flash patterns.
Provides a table of corrected flow rates based on installation parameters like suction, lift, and total length.