Important
Read this manual carefully and become familiar with the specifications and operation of the
REFCO DIGIMON digital manifold prior to use. The instructions will give you important
information in regards to the operation and service of the manifold.
Purpose and use
The manifold has been designed specifically to measure pressure and temperature in refrigeration equip-
ment. The manifold may only be used by trained technicians.
The manifold must not be used for other than refrigerant applications. The manifold is not suit
able for other liquids or gases except those indicated on the display.
The manifold must not be used with pressure higher than 55bar / 800psi / 5500kPa / 5.5MPa.
The manifold can not be used as a pressure regulator.
The manifold can not be used with ammonia (NH3 / R717) and carbon dioxide (CO2 / R744)
Safety glasses and gloves must be worn during the use of the manifold
English
MEDIAWORKS • BOX 104 • 288 22 VINSLÖV • SWEDEN • TEL. +46 44 70050 • FAX. +46 44 81200 • INFO@MEDIA-WORKS.SE • WWW.MEDIA-WORKS.SE
1
3
4
5
2
1
To Next Page
Need help?
General
