To Next PageTo Next Page
Need help?Do you have a question about the Reflex REFLEXOMAT RG and is the answer not in the manual?
General| Brand | Reflex |
|---|---|
| Model | REFLEXOMAT RG |
| Category | Industrial Equipment |
| Language | English |
Carefully read and follow instructions before assembly, operation, or maintenance.
Assembly, commissioning, and maintenance must be performed by qualified personnel.
Observe and comply with all warnings in the instructions.
Follow national standards for pressure equipment operation and accident prevention.
Follow local occupational health and safety measures.
Operate Reflexomat vessels only in conjunction with the Reflexomat control unit.
No warranty or liability for failure to heed instructions or incorrect installation/operation.
Refer to the Reflexomat operating instructions for maintenance.
Pressure equipment is subject to mandatory testing.
Observe local regulations for recycling or waste disposal.
Consider standards like DIN EN 12828 for heating systems.
Compliance with Pressure Equipment Directive 2014/68/EU is required.
Visual overview of RG and RF models with PPE requirements.
Technical data for Reflexomat RG models (200-800, 1000-5000, 350-5000).
Technical data for Reflexomat RF models (200-800, 1000-5000, 350-5000).
Diagrams illustrating different Reflexomat system configurations.
Required spacing and temperature limits for installation.
Guidelines for vessel orientation and placement.
Warnings related to vessel weight and handling.
Instructions for placing tanks and handling precautions.
Detailed steps for installing tank components.
Procedures for connecting pipes and electrical wiring.
Instructions for connecting hoses to the control unit.
Information on how to download documents and declarations.
