Need help?Do you have a question about the Reflex Servitec 35 and is the answer not in the manual?
General| Brand | Reflex |
|---|---|
| Model | Servitec 35 |
| Category | Industrial Equipment |
| Language | English |
Details potential risks like burns, pressurized liquid, and heavy weight, with precautions.
Verifies all installation steps are completed before starting commissioning.
How to set the minimum operating pressure for Magcontrol mode.
Steps to configure initial device parameters during the start routine.
Step-by-step guide to fill the device with water and remove air.
Instructions for conducting a vacuum test to ensure proper function.
How to initiate and run the device in Automatic mode.
How to adjust device settings via the Customer menu.
Navigating the Customer menu and setting the time as an example.
How to select and configure specific degassing programs.
Lists error codes, their causes, and recommended corrective actions.
Summary of routine maintenance tasks and their intervals.
To Next Page
