EasyManua.ls Logo

Reflex Storatherm HF Series - 5 Installation; Transport; Installation Location; Tank Assembly

Reflex Storatherm HF Series
44 pages
Go to English
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Installation
Storatherm 06.04.2018 English 7
5 Installation
WARNING
Risk of injury due to heavy weight
The tanks are heavy. Consequently, there is a risk of physical injury and accidents.
Use suitable lifting equipment for transportation and installation.
CAUTION
Risk of scalding
Scalding of the skin and eyes caused by escaping hot water.
Wear personal protective equipment: Protective gloves, protective clothing, safety goggles.
5.1 Transport
The tank insulation can be removed for transport.
5.2 Installation location
Ensure the following conditions are fulfilled for the installation location:
Connections must be freely accessible.
Freedom from frost must be ensured.
The ground must be load bearing and horizontal.
5.3 Tank assembly
5.3.1 Installation
Remove the outer packaging and undo the screws with which the tank is screwed to the pallet. Position the tank.
WARNING
Risk of injury due to tipping over of the device
Risk of bruising or crushing caused by tipping over of the device
Ensure sufficient stability of the device.

Related product manuals