Need help?Do you have a question about the Rega Brio and is the answer not in the manual?
General| Amplifier class | - |
|---|---|
| Output impedance | 470 Ω |
| Audio output channels | - channels |
| Peak power per channel | 93 W |
| Signal-to-Noise Ratio (SNR) | - dB |
| Total Harmonic Distortion (THD) | - % |
| RMS power output per channel (8 Ohm) | 58 W |
| Batteries included | Yes |
| Purpose | Home |
| Product color | Black |
| Volume control | Rotary |
| Connectivity technology | Wired |
| Audio (L/R) in | 5 |
| Audio (L/R) out | 1 |
| Line inputs (RCA) | 4 |
| Headphone connectivity | 6.3 mm |
| Speakers connectivity type | Binding post |
| AC input voltage | 100 - 230 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (typical) | 195 W |
| Operating temperature (T-T) | 5 - 35 °C |
Weight and Dimensions| Depth | 345 mm |
|---|---|
| Width | 216 mm |
| Height | 78 mm |
| Weight | 5100 g |
Details all line level inputs and outputs via RCA connectors.
Explains how to earth the turntable tonearm via the amplifier's earthing nut.
The Brio is capable of driving all normal hi-fi loudspeakers.
The Brio can drive standard hi-fi headphones; speakers are automatically turned off.
Details the on/off button, headphone socket, input display, and volume control.
Advises on ambient temperature, air circulation, and avoiding moisture.
Details sensitivity and maximum input levels for phono and line inputs.
Specifies RMS power output into different impedance loads.
Provides output voltage levels for various headphone impedances.
States the unit's power draw under specified conditions.
Defines the level and impedance of the record output signal.
Lists frequency response range for phono and line inputs.
Specifies fuse types and ratings for different voltage inputs.
Details the manufacturer's name, address, and location.
To Next Page
