To Next PageTo Next Page
Need help?Do you have a question about the Rega Elex-R and is the answer not in the manual?
General| Amplifier class | - |
|---|---|
| Output impedance | 470 Ω |
| Input sensitivity | 164 mV |
| Audio output channels | - channels |
| Peak power per channel | - W |
| Signal-to-Noise Ratio (SNR) | - dB |
| Total Harmonic Distortion (THD) | - % |
| Dynamic power per channel (6 Ohm) | 90 W |
| RMS power output per channel (8 Ohm) | 72.5 W |
| LED indicators | Yes |
| AC input voltage | 115 - 230 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (typical) | 250 W |
| Audio (L/R) in | 5 |
| Audio (L/R) out | 2 |
| Line inputs (RCA) | 4 |
| Speakers connectivity type | Binding post |
| Purpose | Home |
| Product color | Black |
| Volume control | Rotary |
| Connectivity technology | Wired |
Weight and Dimensions| Depth | 320 mm |
|---|---|
| Width | 430 mm |
| Height | 80 mm |
Identifies the power button and the remote control signal receiver on the front panel.
Details the input selection mechanism and the volume adjustment control.
Describes the mute button for silencing the audio output.
Provides an overview of the various input and output connections on the rear of the amplifier.
Details the tonearm ground connection, phono input, and line inputs.
Describes record output, pre-amplifier output, and speaker connection terminals.
Identifies the power input socket and the location of the fuse.
Details the primary functions available on the remote control unit.
Illustrates how to connect the power cable to the amplifier.
Shows the correct way to connect speakers to the amplifier's output terminals.
Guides on connecting a turntable or phono source to the dedicated input.
Explains the connection and use of the pre-amplifier output.
Illustrates how to connect line-level audio sources.
Details the connection for recording devices from the amplifier's output.
Specifies voltage, frequency, consumption, and fuse ratings for the unit.
Lists sensitivity and maximum input levels for phono and line inputs.
Details speaker power output and record/pre-amp output levels and impedances.
Provides essential safety warnings for operation, ventilation, and maintenance.
