Do you have a question about the Rega Exon and is the answer not in the manual?
Details the fully symmetrical circuit topology and common base voltage amplifier driver stage.
Explains how the amplifier disperses heat and the importance of air passage around the case.
Explains the required drive level for Exon 3 with Cursa and Mira pre-amplifiers.
Details the input and link sockets on the rear of the amplifier.
Recommends using good quality cable and advises against expensive or solid core types.
Warns against shorting speaker cable ends and joining cables to extend length.
Describes the procedure for turning the amplifier on and the recommended sequence for system components.