10
Loudspeakers
The Rega amplifiers are capable of driving all normal hi-fi
loudspeakers. (Most loudspeakers have nominal impedance of 8Ω).
If driving loudspeakers of unusually low impedance (4Ω or less)
ensure that you check with your dealer for compatibility.
Loudspeaker Cable
We recommend using good quality cable such as our own, or similar
types made by other quality hi-fi companies. Very expensive cable
claiming to use special materials and technologies, along with solid
core' or OFC types, are not recommended, as they often do not
represent value for money. Try to keep cable runs to either speaker of
equal length. Your Rega dealer will be able to make up specific
lengths of cable for you with plugs already fitted.
Damage by shorting
Never short (i.e. touch together) the bare ends of speaker cable on
any amplifier. However, the protection circuit will prevent damage in
the case of accidental shorting. Never join cables together to increase
their length.
To Next Page
Loading...
Need help?
General
