Need help?Do you have a question about the Rega fono mc and is the answer not in the manual?
General| Power consumption | 5 W |
|---|---|
| Type | Phono Preamplifier |
| Output impedance | 200Ω |
| Frequency response | 13 Hz (-3 dB) to 100 kHz (-0.3 dB) |
| Power Supply | 24 V AC |
Instructions for turning the Fono MC on, noting the RED Rega logo indicator and power surge warning.
Details how to connect tonearm leads to the input socket and earth terminal, and output to the amplifier.
Explains the DIP switches for selecting input loading resistance, capacitance, and gain on the rear panel.
Guidance on connecting the separate signal earth wire from the turntable or tonearm to the unit.
Illustrates the single power button on the front panel of the Fono MC.
Diagram of the rear panel showing input, output, turntable earth, and DIP switches.
Details input sensitivity for 200mV output and maximum input level at 1KHz.
Lists selectable resistance and capacitance values for the input stage.
Specifies gain settings at 1KHz and the frequency response characteristics.
Instructions to connect the Rega PS1 to the AC socket on the Fono MC's back panel.
Details AC input and DC output specs for UK, EU, and US versions of the PS1 power supply.
Emphasizes using only the Rega PS1 power supply and avoiding exposure to rain or moisture.
Warns against opening the case covers as there are no user-serviceable parts inside.
To Next Page
