Need help?Do you have a question about the Rega Elicit-R and is the answer not in the manual?
General| Amplifier class | - |
|---|---|
| Frequency range | 10 - 85000 Hz |
| Input sensitivity | 196 mV |
| Audio output channels | - channels |
| Peak power per channel | - W |
| Signal-to-Noise Ratio (SNR) | 31.6 dB |
| Total Harmonic Distortion (THD) | 0.003 % |
| Dynamic power per channel (4 Ohm) | 162 W |
| Dynamic power per channel (6 Ohm) | 127 W |
| Dynamic power per channel (8 Ohm) | 105 W |
| Audio (L/R) in | 7 |
| Audio (L/R) out | 3 |
| Phono audio in (L,R) | Yes |
| Speakers connectivity type | Binding post |
| AC input voltage | 115 - 230 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (typical) | 375 W |
| Purpose | Home |
| Product color | Black |
| Volume control | Rotary |
| Connectivity technology | Wired |
Weight and Dimensions| Depth | 340 mm |
|---|---|
| Width | 432 mm |
| Height | 82 mm |
| Weight | 13000 g |
Details the output amplifier design and its components for improved performance.
Warns that heat sinks can become very hot and advises on proper airflow and placement.
Explains the use of line inputs for connecting various audio sources like CD, DAC, and tuners.
Describes the pre-amplifier output's capability and RCA connector type.
Details record input/output functions and the parallel output link.
Describes the direct input bypassing volume control for multichannel systems or external pre-amps.
Explains earthing methods for Rega turntables and tonearms.
Details the amplifier's power-on sequence and the importance of the self-test cycle.
Explains how to select inputs using the front panel controls and remote.
Describes the function of the mute button to silence outputs.
Explains how the volume is adjusted, its resolution, and the LED display indicators.
Details how to adjust the brightness of the volume control LED display.
Warns against exposure to liquids, removing covers, and placing naked flames near the apparatus.
Lists the power output ratings into different impedance loads (8Ω, 6Ω, 4Ω).
Details input sensitivity for line, phono, and direct inputs.
Provides the physical dimensions and weight of the amplifier.
Specifies the frequency response for line and phono inputs and RIAA accuracy.
Details the Total Harmonic Distortion plus Noise for direct and line inputs.
Lists AC supply voltage, power consumption, and fuse ratings.
To Next Page
