Need help?Do you have a question about the Rega FONO MM MK5 and is the answer not in the manual?
General| Input Loading | 47kΩ in parallel with 100pF |
|---|---|
| Output Impedance | 200Ω |
| Gain | 41.4dB |
| Power Requirements | 24V AC |
| Signal to Noise Ratio | 78dB |
| Type | Moving Magnet |
| THD | 0.01% |
| Power Supply | Rega PS1 |
Connect tonearm leads, earth, and output to amplifier line input.
Connect the Rega PS1 to the AC socket on the Fono back panel.
Do not connect Fono to an integrated amplifier's phono input.
Press on-off button; Rega logo glows RED when active.
Turn Fono on first, then amplifier, to avoid speaker thumps.
Details on input sensitivity, loading, max level, gain, and output impedance.
Details on minimum load resistance, frequency response, and RIAA accuracy.
24 V AC at 80 mA maximum. Use only with Rega PS1.
Do not dispose of as household waste; use designated collection points for electronic equipment.
Lifetime warranty against defects; avoid modifications and follow guidelines.
Use original packaging for returns; incorrect packaging may invalidate warranty.
Use only Rega PS1; do not expose to rain or moisture.
Do not open case covers; no user-serviceable parts inside.
Input 230V/50Hz, Output 24V/350mA AC.
Input 220V/60Hz, Output 24V/350mA AC.
Input 115-120V/60Hz, Output 24V/350mA AC.
Input 100V/50-60Hz, Output 24V/350mA AC.
To Next Page