5
Power handling figures are quoted as a guide.
Amplification between 30w and 500w can be used
safely depending on the quality of amplification.
Assembly
After unpacking the speakers from the box, fit the
spikes to the plinth. Please pay attention to the
warning in the spike pack. Ensure that the spikes
are secured tightly in the speaker plinth.
Please do not re-tighten the screws on the drive
units. They are fitted to a measured torque and
over tightening will strip the thread.
The grills are easily removed and applied, we
recommend their use to prevent damage and long
term build up of dust especially on the high
frequency unit.
To Next Page
