Need help?Do you have a question about the Regal-Beloit GE ECM 2.3 and is the answer not in the manual?
Details the evolution of ECM motor models from 1.0 to 2.5.
Overview of the first generation ECM 1.0 motor.
Overview of the second generation ECM 2.0 motor.
Overview of the third generation ECM 2.3 motor.
Overview of the fourth generation ECM 2.5 motor.
Discusses the limitations of ECM motors regarding ductwork.
Explains the function and components of the motor control.
Explains the 3-phase AC motor component.
Details the assembly of the motor control module.
Details the power conditioning module assembly.
Details the microcomputer module assembly.
Communication mode for ECM 2.3 motors via thermostat.
Communication mode for ECM 2.3 motors via PWM signal.
Communication mode for ECM 2.5 motors via DSI.
Details jumper pin configurations for system setup.
Details dip switch configurations for system setup.
Explains settings for delay time selection.
Explains settings for cooling tonnage selection.
Explains model plug settings for heating selection.
Setup and operation for thermostat control mode.
Steps for selecting cooling airflow settings.
Advantages of selecting cooling airflow.
Steps for selecting heating airflow settings.
Advantages of selecting heating airflow.
Steps for configuring trim/adjust airflow settings.
Advantages of trim/adjust airflow settings.
Provides helpful advice on trim/adjust airflow settings.
Steps for setting climate/delay profiles.
Advantages of using climate/delay profiles.
Steps for installing and using the humidistat option.
Advantages of using the humidistat option.
Steps for setting up constant fan mode.
Advantages of using constant fan mode.
Describes output options for constant fan mode.
Details the ECM Service Guide resource for troubleshooting.
Details the TECMate XL service tool for diagnostics.
Details the TECMate PRO service tool for diagnostics.
Procedure for testing winding to ground resistance.
Checklist for verifying system setup after installation.
Recommendations for conducting service calls effectively.
Identifies GE ECM 2.3 and 2.5 motor models.
Identifies GE ECM 2.0 motor models.
Compares features of X13 ECM motors and PSC motors.
Describes the high voltage power connections for the X13 motor.
Describes the low voltage control connections for the X13 motor.
Details the ECM Service Guide for X13 motor servicing.
Checklist for verifying X13 system setup after installation.
Recommendations for X13 service calls.
General| Brand | Regal-Beloit |
|---|---|
| Model | GE ECM 2.3 |
| Category | Engine |
| Language | English |
To Next Page
