Need help?Do you have a question about the Regal 42 GRAND COUPE and is the answer not in the manual?
Information regarding California's Proposition 65 emissions regulations for marine watercraft.
Details on the warranty for evaporative emission control systems.
Outlines owner's duties regarding maintenance and warranty coverage for spark-ignition models.
A quick start checklist for operating the air conditioning system.
Guidance on locating and cleaning air conditioner filters for optimal performance.
Common issues and troubleshooting steps for the air conditioning system.
Explains how carbon monoxide detectors function and their operational procedures.
Provides important notes and maintenance tips for carbon monoxide detectors.
Explains the vessel's direct current (DC) electrical systems and components.
Details the breaker panel, its description, meters, and individual breakers.
Proper procedures for connecting and using the dock side power cord.
Explains the Equipment Leakage Circuit Interrupter system and its function.
Details the LED indicators for ELCI system status and fault detection.
Information on the main shore power breakers and their control over 240V and 120V components.
How to check for correct shore power polarity using the indicator light.
Explains the NMEA 2000 communication system and its backbone structure.
Step-by-step guide on how to start and operate the radar system.
Steps to activate the satellite weather service for up-to-date information.
Procedures for accessing and using satellite weather data on the GPS/Plotter.
Basic steps to start up and configure the Fusion stereo system via the plotter.
Information on using HDMI ports for connecting auxiliary devices to the entertainment system.
Details on the automatic fire suppression system, its operation, and status indicators.
Procedures for filling the fresh water tank using deck or city water fittings.
Instructions for sanitizing the fresh water system to ensure cleanliness and safety.
Guidelines for winterizing the fresh water system to prevent freeze damage.
Explains the operation cycle and key components of the hot water heater.
Overview of the diesel fuel system for IPS propulsion, including components and operation.
Explains properties of diesel fuel and common issues like "algae".
Explains the importance of fresh air supply for diesel engines and ventilation components.
Procedures for draining, priming, and replacing the primary diesel fuel filter.
Information on servicing the secondary fuel filter mounted on the engine.
Requirements for premium unleaded gasoline and octane ratings for Yamaha outboards.
Details on the fuel system for IPS Kohler and Fischer Panda generators.
Specific notes regarding the Kohler diesel generator fuel filter system and exhaust.
Step-by-step guide to starting the Kohler diesel generator.
Step-by-step guide to safely stopping the Kohler generator.
Introduction to helm controls for Volvo IPS diesel propelled vessels.
Introduction to helm controls for Yamaha outboard propelled vessels.
Identifies components and layout of the typical lower helm control display for IPS systems.
Details the functions and operations of the Digital Electronic Control (DEC) remote for engines.
Illustrates and explains the various functions of the IPS joystick for vessel maneuverability.
Details the basic operation of the joystick for triple engine vessels.
Describes the autopilot panel features, operation, and modes like Heading Hold.
Explains how to obtain a trimmed position using trim tabs and power trim.
How trim tabs can be used to correct a vessel's list.
How to check waste tank levels and use pump-out stations or overboard discharge.
Details the overboard discharge system, its operation, and legal considerations.
Step-by-step guide on how to use the vacuum style toilet and its control panel.
Important notes and safety precautions regarding marine toilet usage and maintenance.
Details the shower collection box, pump, and associated plumbing for grey water management.
Procedures for paying out and hauling anchors using power or gravity.
A comprehensive checklist for ensuring the vessel is ready before getting underway.
Checklists and warnings for operating and securing the vessel while underway and disembarking.
Explains different types of dock lines and how to properly secure them for mooring.
Basic principles of gathering headway, turning, backing, and stopping a vessel.
Information on the types, usage, and care of boat fenders.
Explains the purpose and operation of power trim for optimizing boat performance and ride.
Details how trim tabs are used to adjust the boat's attitude and achieve optimal planing.
Guidelines for safely operating the vessel in shallow water, including hazard avoidance.
Best practices for selecting and deploying anchors for secure mooring.
Safety instructions for towing other vessels and handling emergencies like fires.
Guidance on basic first aid, CPR, and treating hypothermia in emergencies.
Instructions on preventing and responding to fires aboard the vessel.
Explains the operation, testing, and maintenance of the bilge pump system.
Details the operation, safety notices, and usage of the bow thruster.
Information on the operation and maintenance of patio doors and integrated blinds.
Details on optional canvas covers for transom seats, enclosures, windshields, and sunpads.
Instructions for operating the cockpit grill, including safety precautions and cleaning.
Details on the operation, usage, and maintenance of the cockpit/patio refrigerator.
Information on the care and storage of optional cockpit sea-grass mats.
Explains the fender clip option for secure fender attachment and dock protection.
Identifies and describes equipment located at the flybridge helm station.
Explains the operation and adjustment of helm and passenger seats on the flybridge.
Details the use, capacity, and safety precautions for the flybridge stairway.
Describes the Seakeeper display, its functions, alarms, and basic operation.
Instructions for operating the spotlight, including remote control and speed adjustments.
Explains the cockpit and flybridge scupper drain systems, their maintenance, and grate locations.
Details the versatility of the foredeck sun lounge and related safety/storage recommendations.
Instructions for operating the sun roof and safety precautions during opening/closing.
Step-by-step guide for operating the electric stove, including safety and use tips.
Guidelines for safe use, maintenance, and tips for swim platforms and ladders.
Step-by-step instructions for setting up and disassembling the teak table.
Instructions for opening/closing the transom door and associated safety warnings.
How to operate the vacuum system, safety warnings, and troubleshooting tips.
Information on the underwater lighting system, its components, and operation.
Details on the operation and maintenance of the windshield wiper and washer system.
Procedures for cleaning and maintaining upholstery, plastic, acrylic, and canvas surfaces.
Specific instructions for cleaning and maintaining vinyl and fabric upholstery.
Guidelines for cleaning and polishing acrylic and plastic components to maintain their finish.
Routine washing, waxing, and minor repair procedures for fiberglass and gel coat surfaces.
Information on cleaning, treating, and storing boat canvas for longevity and appearance.
Proper techniques for cleaning and maintaining clear vinyl, zippers, and snap fasteners.
Recommendations for cleaning and polishing stainless steel and other metal components.
Importance of keeping the hull bottom clean to reduce drag and maintain performance.
Common engine problems and their possible causes for quick diagnosis.
Troubleshooting chart for common DC electrical system problems and their causes.
Troubleshooting chart for AC electrical system issues and potential causes.
Checklists and procedures for engine winterization and boat decommissioning for storage.
Steps for winterizing the fresh water and waste systems to prevent freeze damage.
Definitions of common nautical terms used throughout the manual.
An alphabetical listing of topics covered in the manual with corresponding page numbers.
Information on the purpose and scope of technical drawings and specifications in the manual.
Identifies the location and meaning of various warning and notice labels on the vessel.
Diagrams illustrating the routing of electrical harnesses throughout the vessel's various sections.
Overview of the vessel's battery management and switch panel systems.
Diagrams showing the routing for fresh water, waste water, bilge pump, and AC systems.
Diagrams illustrating the routing of fuel lines, tanks, and filters for engines and generators.
Diagrams showing the layout of components in the outboard sump/bilge area.
To Next Page
General
