8
4.3 PAUSE MODE
The VGreen Evo™ motor is equipped with a Pause Mode that will allow the
user to temporarily stop the VGreen Evo motor for maintenance work without
disrupting the 24 hour schedule (i.e., for backwashing the filter). If the VGreen
Evo motor is currently running, the user can follow the below illustrations to
operate Pause Mode:
To enter Pause Mode
PRESS button 2 times:
While in Pause Mode light will blink slowly:
There is NO automatic timeout of Pause Mode:
1
∕8 sec 2
1
∕2 sec
NOT RUNNING
RUNNING (any speed)
RUNNING (high speed)
PRESS 2 Times
2x
24 HOURS
To exit Pause Mode PRESS
and HOLD button for 3
seconds then release:
PRESS & HOLD for 3 Seconds
3 sec