162
Remote Control-Typical
Check the helm control
box and make sure
there is no roughness
or tightness when
shifting. Also, check to
make sure the control
box hardware is
tightly secured. With
mechanical controls
check that control cable is secured properly at the
helm rack and the engine end. Check throttle control
at engine and control box for excessive play.
Select vessels use electronic shifting which is called
“fly by wire” Being the engines use electronics to
shift it should be effortless. An application of silicone
spray on the handles will help fight any corrosion.
There is a friction control which may be altered to
personal needs. To adjust the friction control on side
mount remote controls it needs to be preformed
by an authorized dealer. Contact your closest
Regal dealer for further assistance or a marine
professional.
To Next Page
Loading...
