94
Power Steering Operation
Your vessel features a rack steering system verses a
digital based system. The rack includes a mechanical
cable that travels from the steering wheel rack to
the engine power steering cylinder. It is assisted by
a belt driven power steering pump which pushes
power steering fluid through the engine mounted
power steering cylinder as the steering wheel is
rotated to port or starboard.
The system provides smooth, almost effortless
tracking to both port and starboard directions.
Note that whenever you check the engine oil it
is recommended at that point to check the power
steering reservoir fluid level. Fill with correct type of
power steering fluid. See the engine owner’s manual
for more information regarding power steering
specifications.
Hints For Shifting
• DO NOT shift quickly from forward to reverse
gear positions. Drive system damage may
occur.
• DO NOT “pump” the throttle in neutral as it is
normally not needed since today’s engines use
an enrichment valve system that requires very
little starting throttle.
• DO NOT try to shift into forward or reverse gear
at high rpm’s. Personal injury, drive system, or
property damage may result.
• Only use idle throttle positions when docking
or maneuvering in tight quarters.
• Wear your safety lanyard at all times.
• Never shift the controls with the engine not
running.
• Always ensure you have unobstructed visibility
before you shift into forward or reverse gears.
• For more information on remote controls and
shifting read engine manufacturer’s operation
manual before operating the remote control.
To Next Page
Loading...
