122
Bow Filler Cushion
Your vessel may include an a bow filler cushion.
Your vessel’s appearance may vary from below. To
set up the filler cushion follow these steps:
1. Find the filler cushion which is stored in one
of the bow storage compartments accessible by
lifting the seat cushion.
2. Locate the support bars which normally are
found in the bow storage compartment. Position
shorter bar in the forward grooves. Position the
longer bar in the aft grooves. See photo below.
STORAGE STORAGE
1
2
SHORT BAR
LONG BAR
1. Insert the hard back filler cushion in place and
align as needed. This completes the installation.
3
To Next Page
Loading...
