To Next PageTo Next Page
Need help?Do you have a question about the Regalo 6010 HD and is the answer not in the manual?
Read and follow all instructions carefully for proper installation to ensure safety and prevent serious injury or death.
Periodically check for damage, wear, or missing parts. Clean with warm water and mild detergent.
Check that all listed parts A through G are present before beginning assembly.
Instructions for connecting support bars and sides using spring pins.
Install the mesh wall by sliding it over the frame, zipping it shut, and attaching the velcro strap.
Align the left guide pins with the guide track on the left guide arm assembly, and repeat on the right side.
Slide the frame assembly along the guide track on each side.
Pivot the frame assembly into an upright position; it should automatically lock into place.
Remove mattress, place rail on box spring, extend straps to anchor to the other side.
Place mattress on top, ensure anchoring straps are not twisted and mesh wall fits snugly.
Release strap locks and pull straps to tighten, adjusting for mattress type to prevent buckling.
Close locking buckle, ensure mesh wall has no gaps, and check for twisted straps.
Locate and pull spring locking knobs up to release the frame from its upright position.
Pivot the bed rail mesh wall down until it is parallel with the top surface of the mattress.
Slide the bed rail mesh wall under the mattress until it is entirely hidden by the top mattress.
Identifies the Mesh Wall (Part A) for Model 6010 HD.
Details warranty coverage for defects in materials or workmanship within 90 days of purchase.
Warnings about gaps, use with young children, not in place of cribs, and proper installation.
General| Brand | Regalo |
|---|---|
| Model | 6010 HD |
| Category | Baby & Toddler Furniture |
| Language | English |
