To Next PageTo Next Page
Need help?Do you have a question about the Regalo 2250 and is the answer not in the manual?
Critical safety warnings regarding suffocation and strangulation hazards.
Insert upper support bars into bottom support bars and secure with spring pins.
Connect the assembled left and right sides of the bed rail structure.
Slide mesh wall over frame, zip shut, and attach velcro strap.
Connect the left and right swing lock and strap assemblies to the frame.
Insert wall frame into leg pieces and secure hinges using spring buttons.
Place the assembled bed rail onto the bed structure for final positioning.
Place mattress atop, sandwiching corner hinges and anchoring straps.
Release strap locks, pull straps to remove slack, and ensure firm fit.
Correct twisted straps, pull strap end, and secure with locking buckle.
Push locking tabs to secure rail in 'up' position; ensure mesh wall is flush.
Release locking tabs on swing lock assemblies to enable free movement of the rail.
Hold upper part, swing rail down to the 'down' position; reverse to return.
Warranty covers defects in materials or workmanship for 90 days from purchase.
General| Material | Steel |
|---|---|
| Height | 30 inches |
| Color | White |
| One-Hand Operation | Yes |
| Certification | JPMA Certified |
| Product Type | Baby Gate |
| Mounting Type | Pressure Mount |
| Weight Capacity | N/A (Safety gates are not rated by weight capacity, but by their ability to withstand force) |
