Regalo 2250 - Assembling Your Bed Rail - Part 1; Step 1: Connecting Support Bars; Step 2: Joining Bed Rail Sides

English 5
Assembling Your Bed Rail
NOTE: Make sure that the spring pins are secured into the opposing holes
so that the bed rail cannot pull apart.
STEP 1
Insert the left upper support bar into the left bottom support bar. Make sure
the spring pin fits securely into the opposing hole so that the two pieces
cannot pull apart. Repeat on the right side of the bed rail.
STEP 2
With the left and right sides of the bed rail assembled, connect the two sides.
SECURED
SPRING
BUTTON
SPRING
PIN