English6
NOTE: If the zipper does not close securely, make the necessary adjustments
to ensure proper closure. DO NOT use the bed rail without securely zipping the
mesh wall properly.
STEP 3
To install the mesh wall on the bed
rail, slide it over the frame until
it reaches the other end, zip it
shut, then attach the velcro strap
over the zipper to complete the
installation.
Repeat STEPS 1 – 3 to assemble
the second side of the
double bed rail.
Pull straps to tighten Latch Closed
Latch Open
Swung Down
To Next Page
Loading...
