English 9
STEP 2
Once the bed rail is placed properly, place the
mattress back atop of the box spring or mattress
support, sandwiching the flat metal bars on the corner
hinges and the anchoring straps between the box
spring and the mattress.
NOTE: In order for the bed rail mesh wall to be firmly held against the side
of the mattress you MUST properly tighten the anchoring straps. Please
follow STEPS 3 – 4 carefully.
STEP 3
Tighten the straps to bring the bed rail into its proper position. To tighten the
straps, first release the strap locks on the under side of the plastic hinges.
Pull the straps towards you until all the excess slack has been pulled out from
under the mattress and both sides of the bed rail are firmly pressed against the
sides of the mattress.
To Next Page
Loading...
