English8
Installing Your Bed Rail
NOTE: The following steps may require the help of an additional person.
NOTE: In order to adjust the bed rail to fit your specific bed properly, you
may need to release the strap locking buckles located on the under side of
the plastic hinges. The anchoring straps should not be twisted. If twisted, the
anchoring straps may not tighten properly.
STEP 1
Remove the mattress from the bed you will be mounting the double sided bed
rail to. Place the assembly atop the box spring or mattress support structure so
that it is positioned in the orientation of its final placement.
To Next Page
Loading...
