Regalo Maxi Super Wide - User Manual

www.regalo-baby.com
Regalo International, LLC.
3200 Corporate Center Drive, Suite 100 / Burnsville, MN 55306, USA
866.272.5274 (U.S. only) or 952.435.1080
Made in China
Maxi Super Wide
Safety Gate
OWNER’S MANUAL MODEL: 1190, 1190DS
• READ ALL INSTRUCTIONS BEFORE ASSEMBLY AND USE OF GATE.
• KEEP INSTRUCTIONS FOR FUTURE USE.

Summary

Before Using Product

WARNING

Before Assembly

Assembling and Installing Your Gate

STEP 1: Determine Doorway Width

Measure the doorway or opening to determine the correct gate configuration.

STEP 2: Attach Extension Panel

Connect the extension panel to the main gate panel using double-ended screws.

STEP 3: Insert Threaded Rods

Insert threaded rods into the corners of the assembled gate for adjustment.

STEP 4: Mark Mounting Locations

Use the template to accurately mark screw hole positions for mounting brackets.

STEP 5: Attach Mounting Brackets

Securely fasten the maxi mounting brackets to the wall at the marked locations.

STEP 6: Attach Stabilizing Foot

Connect the stabilizing foot to the bottom of the gate frame.

STEP 7: Connect Gate to Wall

Attach the gate to the wall brackets by inserting threaded rods.

STEP 8: Adjust and Tighten

Adjust gate spacing and tighten locking nuts for secure installation.

Removing Your Gate from the Wall

Care and Maintenance

90 Days Limited Warranty

Replacement Parts

Regalo Maxi Super Wide Specifications

General

Material	Steel
Color	White
Minimum Width	29 inches
Maximum Width	52 inches
Installation Type	Pressure-Mounted
Gate Type	Pressure-mounted
Mounting Type	Pressure mount