To Next PageTo Next Page
Need help?Do you have a question about the Regalo WideSpan Extra Wide 1158 and is the answer not in the manual?
Follow installation instructions, secure gate, use locking mechanism, and supervise children for safety.
Adjust spindle rods by rotating adjustment wheels to eliminate gap with rubber foot.
Insert the four threaded spindle rods into the corners of the gate frame.
Position gate level, expand spindle rods to contact opening without fully tightening.
Tighten lower rods, then upper rods until latch gap narrows, ensuring equal spacing.
After gate mounting, mark circles around rubber feet for wall cup placement.
Remove the gate by loosening all threaded spindle rods to depressurize.
Screw wall cups into marked locations using provided screws.
Reinstall gate using the wall cups as anchoring points for spindle rods.
Pull spring lock and lift lock lever to release the latch and open the door.
Close the door and push down the lock lever to re-engage the spring lock.
Choose a side and remove the top and bottom threaded spindle rods.
Assemble the extension to the gate and refit according to general instructions.
General| Product Type | Safety Gate |
|---|---|
| Height | 30 inches |
| Material | Steel |
| Color | White |
| Category | Indoor Furnishing |
| Model Number | 1158 |
| Adjustable Width | Yes |
| Foldable | No |
| Portable | Yes |
| Mounting Type | Pressure Mounted |
| Minimum Width | 29 inches |
| Product Name | Regalo WideSpan Extra Wide Safety Gate |
