To Next PageTo Next Page
Need help?Do you have a question about the Regalo 1350 and is the answer not in the manual?
Key safety instructions for preventing injury or death during gate use and installation.
Unfold the gate frame by loosening the locking knobs at pivoting joints.
Fix wall mounting brackets to the wall using a Phillips/crosshead screwdriver.
Arrange panels to desired configuration and tighten all locking knobs.
Unfold gate frame by loosening locking knobs at pivoting joints.
Release vertical metal pivot bars by removing specific assembly parts.
Position play yard and join free ends together at plastic joints.
Insert removed metal pivot bars through upper plastic joints into lower housing.
Reassemble upper locking joint with toothed disks and locking knobs.
Tighten locking knobs clockwise to fix the play yard into chosen configuration.
Pull slide lock sideways and pivot metal lift latch upward to open.
Close door completely and drop metal lift latch to relock securely.
Loosen all locking knobs to make the play yard flexible at joints.
Remove one locking knob and one vertical tube from the play yard.
Pull plastic joints and top/bottom of play yard apart to separate.
Fold the separated play yard sections and put away for storage.
General| Brand | Regalo |
|---|---|
| Model | 1350 |
| Category | Indoor Furnishing |
| Language | English |
