English8
STEP 1
Unfold the gate frame by turning the locking knobs counter clockwise at
each pivoting joint. Loosen the knobs enough to allow the gate to swing
open freely without fully removing the knobs.
METAL PIVOT BAR (2)
LOCKING KNOB (2)
TOOTHED DISK (2)
WALL MOUNT BOTTOM
CAP – MALE (1)
WALL MOUNT BRACKET (2)
WALL MOUNT
TOOTHED DISK (1)
WALL MOUNT BOTTOM
CAP – FEMALE (1)
Option B: Installing Your Gate as a Freestanding Enclosure
STEP 2
Release the vertical metal pivot bars at each end of the play yard by
removing the following parts from the assembly:
To Next Page
Loading...
