To Next PageTo Next Page
Need help?Do you have a question about the Regalo 1255 B and is the answer not in the manual?
Instructions and precautions to follow before assembling or using the safety gate.
Key requirements for mounting the gate, including stud mounting and stair placement.
Details on model numbers and manufacturer recommendations for child age and opening sizes.
Guidelines for regularly checking and cleaning the safety gate.
Positioning and securing the lower wall mount hinge against the wall.
Using screws to attach the lower mount wall hinge to the drywall and stud.
Repeating the mounting process for the wall mount hinge snap female.
Attaching hinge adjuster knobs to the main gate panel.
Attaching receiver adjustment knobs to the second gate panel.
Placing the main gate panel into the upper and lower hinges on the wall.
Aligning and sliding the second gate panel with the main gate panel.
Connecting the two gate panels using coupler male and female parts.
Marking locations for the latch assembly wall mount for receivers.
Securing the upper and lower receivers to the wall using screws.
Adjusting knobs to ensure a maximum 2 1/2" gap from the wall to the first picket.
Securing the adjusted knobs by tightening jam nuts with a wrench.
Connecting the wall mount hinge snap female over the male component.
Instructions on how to operate the gate by releasing the latch.
List of components included in Hardware Kit #13255.
List of components included in Hardware Kit #11255.
Details on the limited warranty for the product.
Critical safety instructions for proper installation and ongoing use of the gate.
General| Brand | Regalo |
|---|---|
| Model | 1255 B |
| Category | Indoor Furnishing |
| Language | English |
