Pull straps to tighten Latch Closed
Latch Open
Swung Down
Pull straps to tighten Latch Closed
Latch Open
Swung Down
English 5
Assembling Your Crib Rail
NOTE: Make sure that the spring pins are secured into the opposing holes
so that the crib rail cannot pull apart.
STEP 1
Insert the left upper support
bar into the left bottom
support bar. Make sure the
spring pin fits securely into
the opposing hole so that
the two pieces cannot pull
apart. Repeat on the right
side of the crib rail.
STEP 2
With the left and right sides
of the crib rail assembled,
connect the two sides.
SECURED
SPRING
BUTTON
SPRING
PIN
To Next Page
Loading...
