English8
Installing Your Crib Rail
NOTE: The following steps may require the help of an additional person.
STEP 1
Make sure that you have configured your convertible crib into its toddler bed
configuration, and the crib mattress has been removed. Place the crib rail atop
the mattress support structure so that it is positioned to create a barrier across
the opening of your convertible crib.
NOTE: You may need to release
the strap locking buckles located
on the under side of the plastic
hinges. Ensure that the large end
of the anchor is pointing up. The
anchoring straps should not be
twisted. If twisted, the anchoring
straps will not tighten properly.
Pull straps to tighten Latch Closed
Latch Open
Swung Down
To Next Page
Loading...
