To Next PageTo Next Page
Need help?Do you have a question about the Regency Energy U32-NG10 and is the answer not in the manual?
Details critical safety warnings regarding fire or explosion risks associated with the appliance.
Provides essential steps to take immediately if a gas smell is detected.
Congratulates the owner and introduces the features and benefits of the Regency Gas Insert.
Emphasizes the danger of hot glass and advises to keep children and others away.
Provides detailed diagrams and measurements of the gas insert and faceplates.
Details specific requirements and standards for installing the appliance in manufactured homes.
Presents a copy of the safety labels that accompany the gas insert for user review.
Details gas input capacities, pressure requirements, and minimum clearances to combustibles.
Outlines specific requirements for CO detectors in Massachusetts installations.
Specifies manufacturer requirements for gas equipment venting systems, including documentation.
Stresses the importance of following all instructions and consulting the authority having jurisdiction.
Provides essential safety advice regarding children, flammable materials, and appliance location.
Covers local codes, qualified installers, inspection, and safe venting practices.
Details requirements and considerations for installing the insert into masonry or factory-built fireplaces.
Provides a sequential list of tasks and checks required for proper installation of the gas insert.
Specifies minimum fireplace dimensions and clearances to combustibles for safe installation.
Outlines requirements for venting, including limitations on chimney type and flue length.
Details the procedure for making gas connections, emphasizing safety and licensing.
Explains how to perform pressure tests on the gas supply piping system.
Details how to adjust the air shutter for optimal flame appearance and prevent carbon buildup.
Lists the parts included in the log kit and provides initial handling instructions.
Provides step-by-step instructions and diagrams for correctly positioning the logs.
Identifies and describes the components of the SIT 829 gas control valve.
Details the procedure for installing the remote receiver unit with a velcro pad.
Provides instructions for removing and installing the safety screen.
Details the procedure for installing the standard flush door, including gasket placement.
Lists the parts included in the conversion kit for changing from Natural Gas to Propane.
Provides step-by-step instructions for converting the appliance from NG to LP gas.
Details how to attach the spacer and backing to the faceplate.
Instructions for installing the fan speed control box and lower trim.
Provides steps for installing the backing plate with an included spacer.
Details the procedure for installing the backing plate directly without a spacer.
Illustrates the electrical connections for the heater, fan, and remote receiver.
Explains how to install an optional wall thermostat and provides wire length guidelines.
Step-by-step instructions for safely igniting the pilot and main burner.
Details the correct procedure for turning off the appliance and pilot.
Covers initial operation, first fire, and general usage guidelines for the appliance.
Explains how the automatic convection fan operates and how to adjust its speed.
Instructions for replacing the glass gasket and cleaning or replacing the door glass.
Details on replacing logs and performing general maintenance on the venting system.
Provides step-by-step instructions for safely removing the fan assembly.
Details the process of replacing the fan and sealing the access panel.
Provides detailed steps for removing the gas valve assembly from the appliance.
Details the procedure for installing a new gas valve, including gasket and leak testing.
Lists and illustrates the various components that make up the main assembly of the unit.
Details the parts included in the brick panel sets for the fireplace.
Lists all parts associated with the burner assembly, including valves and orifices.
Details the specific parts that comprise the log set for the appliance.
Lists the parts for the low profile faceplate, including the custom backing plate.
Details the parts for the oversize version of the low profile faceplate.
Outlines the limited lifetime warranty coverage for various components and labor.
Specifies conditions, exclusions, and responsibilities related to the product warranty.
Encourages users to register their product online for various benefits.
Provides fields for the installer to complete for record-keeping purposes.
General| Brand | Regency |
|---|---|
| Model | Energy U32-NG10 |
| Category | Indoor Fireplace |
| Language | English |
