To Next PageTo Next Page
Need help?Do you have a question about the Regency I2400M and is the answer not in the manual?
Critical safety warnings, certifications, and installation requirements for the fireplace insert model.
Diagrams illustrating the physical measurements of the fireplace insert for installation planning.
Details the minimum fireplace opening dimensions required for the safe installation of the insert.
Essential pre-installation checks, including local codes and homeowner notification for safe setup.
Requirements for chimney systems and flue liners for safe and efficient operation of the insert.
Specific guidelines for installing the insert into factory-built fireplace systems safely and correctly.
Step-by-step instructions for physically positioning the fireplace insert into the fireplace.
Information on using an optional kit for a secure and proper flue connection.
Minimum clearances to combustible materials required for safe installation into various fireplace types.
Guidelines for assessing the acceptability of alternative floor protection materials based on thermal properties.
Instructions for using brackets to secure the flue liner to the insert for a stable connection.
Methods for connecting the insert to a masonry fireplace flue system.
Step-by-step process for installing the insert into a factory-built fireplace system.
Procedures for attaching the faceplate and trim for a finished and sealed appearance.
Detailed instructions for installing the optional fan or blower unit for heat circulation.
Proper placement of firebricks within the firebox for longevity and heat radiation.
Correct installation of baffles and air tubes for efficient draft and to prevent smoke spillage.
How to attach the door handle and screen door for proper operation and safety.
Important safety precautions to follow while operating the fireplace insert to prevent hazards.
Step-by-step guide for successfully starting and managing the initial fires for proper curing.
Safe procedures for removing ashes from the firebox, including container and disposal guidelines.
How to operate the convection fan for optimal heat distribution, including auto and manual modes.
Methods to prevent creosote buildup and what to do in case of a chimney fire.
Care instructions for maintaining the gold finish on the doors to preserve appearance and warranty.
How to maintain and adjust the door gasket and latch for a proper seal and efficient operation.
Procedures for cleaning the glass when cool and replacing it if it becomes broken.
Step-by-step guide on how to safely remove the glass from the door for cleaning or replacement.
Lists the primary components and optional parts for the fireplace insert, including part numbers.
Details the different faceplate sets available for the insert, including regular and oversize options.
Lists the part numbers for the brick panels used in the firebox construction.
Outlines the components covered, conditions, and exclusions of the limited lifetime warranty.
General| Fuel Type | Natural Gas or Propane |
|---|---|
| Log Size | 18 inches |
| Type | Insert |
| Ignition Type | Manual |
| Log Material | Ceramic Fiber |
| Warranty | Limited Lifetime |
