Do you have a question about the Regency P33-NG4 and is the answer not in the manual?
Specific requirements for CO detectors in Massachusetts for gas appliances.
Guidelines for choosing a safe and compliant location for the fireplace.
Minimum safe air space requirements around the fireplace for bay/flush fronts.
Minimum safe air space requirements with the contemporary faceplate.
Critical clearances required for combustible mantels around the fireplace.
Guidelines for framing the enclosure and finishing around the fireplace.
Overview of the direct vent system technology and approved vent pipes.
Required clearances for exterior vent termination points based on location.
Step-by-step instructions for installing the flex vent system.
Information on using rigid pipe for horizontal and vertical vent terminations.
Procedures for installing the unit with a horizontal vent termination.
Procedures for installing the unit with a vertical vent termination.
Guidelines for connecting the gas supply line to the appliance.
Procedure for testing gas supply piping pressure for leaks.
Instructions for converting the appliance from Natural Gas to Propane.
Part 1 of installing the contemporary faceplate, including derating the BTU.
Safety and lighting instructions as found on the appliance's instruction plate.
Step-by-step guide for igniting or reigniting the pilot and main burner.
Semi-annual inspection and cleaning of the venting system for safety.
Step-by-step instructions for safely removing the gas control valve.
| Brand | Regency |
|---|---|
| Model | P33-NG4 |
| Category | Indoor Fireplace |
| Language | English |
Loading...