EasyManua.ls Logo

Regency P36-NG4 User Manual

Regency P36-NG4
64 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
FPI FIREPLACE PRODUCTS INTERNATIONAL LTD. 6988 Venture St., Delta, BC Canada, V4G 1H4
918-521c
02/23/11
P36 Zero Clearance
Direct Vent Gas Fireplace
Owners & Installation Manual
Tested by:
Installer: Please complete the details on the back cover
and leave this manual with the homeowner.
Homeowner: Please keep these instructions for future reference.
MODELS: P36-NG4 Natural Gas P36-LP4 Propane
WARNING:
If the information in these instructions are not followed exactly, a re
or explosion may result causing property damage, personal injury or
loss of life.
FOR YOUR SAFETY
Do not store or use gasoline or other ammable vapors and liquids in the
vicinity of this or any other appliance.
Installation and service must be performed by a quali ed installer, service
agency or the gas supplier.
FOR YOUR SAFETY
What to do if you smell gas:
Do not try to light any appliance
Do not touch any electrical switch: do not
use any phone in your building.
Immediately call your gas supplier from
a neighbour's phone. Follow the gas
supplier's instructions.
If you cannot reach your gas supplier,
call the re department.

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Regency P36-NG4 and is the answer not in the manual?

Regency P36-NG4 Specifications

General IconGeneral
BrandRegency
ModelP36-NG4
CategoryIndoor Fireplace
LanguageEnglish

Summary

Safety Label

Safety Label

Provides critical safety information and warnings for the fireplace unit.

Installation

MA Code - CO Detector

Massachusetts state code requirements for carbon monoxide detectors.

Installation Checklist

Clearances

Exterior Vent Termination Locations

Venting

Direct Vent System (Flex) Horizontal Terminations

Instructions for horizontal venting using flexible direct vent systems.

Rigid Pipe Venting Systems

Rigid Pipe Venting Arrangements

Horizontal Terminations

Diagrams and guidelines for horizontal rigid pipe venting configurations.

Vertical Terminations

Diagrams and guidelines for vertical rigid pipe venting configurations.

Vertical Termination - Co-Linear Flex System

Direct Vent System (Flex) Installation Procedures

System Data and Installation

Gas Line Installation

Guidelines for connecting the gas supply line.

Appliance Operation and Testing

Pilot Adjustment

Procedure for adjusting the pilot flame.

Gas Pipe Pressure Testing

Instructions for testing gas pipe pressure.

Conversion Kit Installation

DC Sparker Installation

Fan Installation and Operation

Fan Installation (Optional)

Procedure for installing the optional fan.

Optional Control Systems

Remote Control (Optional)

Instructions for installing and using the remote control.

Wall Switch (Optional)

Instructions for installing and wiring a wall switch.

Wall Thermostat (Optional)

Instructions for installing and wiring a wall thermostat.

Wiring Diagrams

Operating Instructions

Lighting Procedure

Step-by-step guide for lighting the pilot and main burner.

Operating and Maintenance Instructions

Maintenance Instructions

General guidelines for maintaining the fireplace unit.

Valve Maintenance

Hampton Options

Parts List

Warranty

The Warranty: Limited Lifetime

Details of the limited lifetime warranty coverage.

Related product manuals