To Next PageTo Next Page
Need help?Do you have a question about the Regency liberty LRI6E and is the answer not in the manual?
Detailed measurements of the unit with the Vignette faceplate.
Measurements for the unit with a specific backing plate configuration.
Dimensions for the unit with a small backing plate and spacer.
Specifications for the unit with a 4-sided faceplate and backing plate.
Massachusetts specific requirements for CO detectors during installation.
Critical safety and installation advice before starting the process.
Preliminary steps and common sense advice for safe installation.
General safety guidelines applicable to appliance installation.
Essential safety precautions regarding combustion and ventilation.
Key technical specifications for the gas insert.
Procedure for testing gas pressure to ensure safe operation.
Guidelines for installing the insert into existing fireplace types.
Specific requirements for factory-built fireplaces used for installation.
A step-by-step checklist to ensure proper installation.
List of necessary materials for the installation process.
Required minimum dimensions for the fireplace installation.
Safety clearances required from combustible materials.
Instructions for making the gas supply connection.
Guidelines for the proper installation of the venting system.
Detailed steps for installing the flue and vent components.
How to adjust the unit's levelling legs for proper positioning.
Instructions for adjusting the air shutter for optimal combustion.
Considerations for installation at high altitudes.
Procedures for installing the gas supply line.
Steps for testing gas pipe pressure after installation.
Description and identification of the 885 S.I.T. gas valve components.
Instructions for converting the appliance from Natural Gas to LP.
Information regarding the Proflame remote system and fan.
Diagram illustrating the electrical wiring connections for the system.
How to install decorative glass crystals or optional stones.
Installing optional decorative media around the firebox burner.
Step-by-step guide for installing the optional log set for HRI6E.
Step-by-step guide for installing the optional log set for LRI6E.
Setting up the pilot and heat exchange return system.
Instructions for installing the interior brick panels.
Instructions for installing the decorative enamel panels.
Procedures for removing and installing the glass door.
Installing the Vignette faceplate and its safety screen.
Steps for installing the decorative inlay onto the faceplate.
Installing the 4-sided faceplate and its safety screen.
Instructions for installing a spacer component.
Steps for attaching the backing plate.
Installing an optional deflector for mantel clearances.
Installing optional hearth trim with a Vignette faceplate and spacer.
Installing optional hearth trim with a Vignette faceplate without a spacer.
Guidance for the initial fire and paint curing process.
How the convection fan operates automatically with the unit.
General procedures for maintaining the appliance.
Information and procedures related to the door glass.
How to adjust the pilot flame for correct operation.
Regular inspection and maintenance of the venting system.
Instructions for replacing the ceramic logs.
Information on replacing the glass gasket.
Steps for removing and installing the glass crystal burner.
Procedures for removing and installing the ceramic burner.
Maintenance procedures for the fan system with remote control.
Detailed steps for replacing the gas control valve.
Overview of the main components and assembly.
Overview of the main components and assembly.
Details of the limited lifetime warranty coverage and terms.
Specific conditions that apply to the warranty coverage.
Items and conditions not covered by the warranty.
Legal limitations on the manufacturer's liability.
Instructions on how to get warranty service for the product.
General| Brand | Regency |
|---|---|
| Model | liberty LRI6E |
| Category | Indoor Fireplace |
| Language | English |
