OPERATION (Continued)
To review the channels in the scan list press
the MANUAL button on the keyboard. Each time the
MANUAL button is pressed the next higher channel
that is in the scan list is displayed.
The Priority Function
The priority function allows the operator to
listen to one channel (non-priority channel) and
not miss an important message on another, more
important channel (priority channel).
Pressing the
PRIOR button on the keyboard will enable or disable
the priority function.
When the priority LED is
lit the priority function is enabled.
To change the priority channel, select the
channel to become the priority channel and press
the PRO PRIOR and ENTER buttons on the keyboard
(in that order).
Priority-Manual Operation
The squelch control must be set, squelching
the radio, to allow the priority function to
operate. When the radio is listening on a non-
priority channel the radio will look at the
priority channel occasionally.
If the priority
channel is active the radio will stop on that
channel and monitor the transmission.
The radio
does this regardless of what is happening on the
non-priority channel.
Lifting the microphone off-hook causes the
radio to revert to the priority channel.
When the
microphone is placed back on-hook the radio,
provided there is no further communication on the
priority channel, will go back to the non-priority
channel the radio was on before.
-
11
-
To Next Page
Loading...