Need help?Do you have a question about the REGLOPLAS P160M and is the answer not in the manual?
Explanation of hazard symbols used in the manual.
Guidelines for positioning and ensuring adequate ventilation for the unit.
Best practices for connecting hoses, including pressure and material needs.
Requirements for connecting the unit to the electrical mains.
Description of monitoring equipment for safe operation.
Step-by-step instructions for switching on the unit.
Procedure to start the unit with RT32 control system.
Explanation of alarm indicators and their meanings.
Procedure for starting the unit with RT50 control system.
Procedures for safely switching off the temperature control unit.
Steps to switch off the unit using RT32 control.
Steps to switch off the unit using RT50 control.
How malfunction messages appear on the RT50 control system.
Overview of scheduled maintenance tasks and intervals.
Specific maintenance tasks to be performed daily.
General| Control Type | PID, On/Off |
|---|---|
| Input Type | Thermocouple |
| Output Type | Relay, SSR |
| Supply Voltage | 100-240 VAC |
| Display | LED |
To Next Page
