Need help?Do you have a question about the Rego RG-MTP58B and is the answer not in the manual?
Visual overview of the printer's physical components.
Explains the product model naming convention and interface options.
Details on printing speed, resolution, fonts, and barcode support.
Specifies the required voltage and current for the printer.
Lists the available communication interfaces for the printer.
Provides dimensions, weight, and paper roll diameter specifications.
Outlines the operating temperature and humidity ranges.
Covers loading method, black mark positioning, paper end detection, commands, and battery.
Instructions for battery installation and loading paper rolls.
Steps for powering on/off, feeding paper, self-testing, and hex printing.
How to configure printer settings like language, density, and Bluetooth name.
Details on connecting and printing via USB, Serial, Bluetooth, and Wi-Fi.
Explains the meaning of LED indicators and buzzer sounds.
Guide for developing with the printer, covering commands and black mark printing.
Specifications for pre-printed black marks for accurate detection by the printer.
Overview of accessing and navigating the printer's web interface for Wi-Fi configuration.
Steps to connect to the printer's AP and log in to the web interface.
Displays device serial number, firmware version, and wireless networking information.
Options to set the Wi-Fi module as AP, STA, or AP+STA mode.
Configuration for connecting to an existing wireless access point.
Settings for the printer to act as a wireless access point.
Configuration for serial port and network parameters for TCP communication.
Page for changing the web server username and password.
Instructions for updating the Wi-Fi module firmware.
Options to restart or reset the Wi-Fi module's configuration.
Resets all Wi-Fi module configurations to factory defaults.
Guidance on network connection debugging, tools, and initial parameters.
Information on using debugging tools for Wi-Fi interface testing.
Explains network connection methods for debugging.
Default SSID, encryption, and network parameters for Wi-Fi.
Steps for testing the printer connection using debugging tools.
To Next Page
General
