Rego RG-MTP80B - User Manual

Need help?

Do you have a question about the Rego RG-MTP80B and is the answer not in the manual?

Summary

ESC;POS Command Details

Mode Switching and Line Spacing

ESC L: Select Page Mode

Switches the printer from standard mode to page mode.

ESC S: Select Standard Mode

Switches the printer from page mode to standard mode.

Print Mode Selection

ESC!n: Select Print Mode(s)

Selects print modes like emphasized, double-height, double-width, and underline.

User-Defined Characters

ESC % n: Select;Cancel User-Defined Character Set

ESC & y c1 c2... Define User-Defined Characters

Defines user-defined characters by specifying dot patterns for character codes.

Underline and Emphasis Modes

ESC - n: Turn Underline Mode On;Off

Turns underline mode on or off with specified thickness.

ESC? n: Cancel User-Defined Characters

ESC E n: Turn Emphasized Mode On;Off

Turns emphasized mode on or off.

Font and Strike Modes

ESC G n: Turn On;Off Double-Strike Mode

ESC M n: Select Character Font

Selects the character font for printing.

Rotation and Code Tables

ESC V n: Turn 90° Clockwise Rotation Mode On;Off

Upside-Down Printing

ESC { n: Turn Upside-Down Print Mode On;Off

Character Size Selection

GS!n: Select Character Size

Selects character height and width.

Reverse Printing and Panel Buttons

GS B n: Turn White;Black Reverse Printing Mode

Positioning Commands

ESC $ nL nH: Set Absolute Print Position

Moves the print position to a specific absolute location.

ESC \ nL nH: Set Relative Print Position

Moves the print position relative to the current position.

ESC a n: Select Justification

Aligns text to left, center, or right within the printing area.

Print Area Layout

GS L nL nH: Set Left Margin

Sets the left margin for the printable area.

GS W nL nH: Set Printing Area Width

Sets the width of the printable area.

ESC W xL xH yL yH...: Set Printing Area in Page Mode

Page Mode Vertical Positioning

GS \ nL nH: Set Relative Vertical Print Position in Page Mode

GS $ nL nH: Set Absolute Vertical Print Position in Page Mode

Page Mode Print Direction

ESC T n: Select Print Direction in Page Mode

Bit Image Operations

ESC * m nL nH d1...dk: Select Bit-Image Mode

Selects bit-image mode and specifies dot density and data.

GS * x y d1...d(x × y × 8): Define Downloaded Bit Image

Defines a downloaded bit image using specified dimensions and data.

GS; m: Print Downloaded Bit Image

Prints a downloaded bit image using a specified mode.

FS P n: Print NV Bit Image

Prints a binary bit image preloaded in the printer's non-volatile memory.

Raster Bit Image Printing

GS v 0 m xL xH yL yH d1... dk: Print Raster Bit Image

Prints a raster bit image according to the specified mode and data.

Macro Definition and Execution

GS: Start;End Macro Definition

GS ^ r t m: Execute Macro

Cut Mode and Real-time Requests

GS V m; GS V m n: Select Cut Mode and Cut Paper

Selects cut mode and executes paper cutting.

Printer Initialization and Pulse Output

ESC @: Initialize Printer

Clears print buffer and resets printer mode to default settings.

Printer ID and Motion Units

GS P x y: Set Horizontal and Vertical Motion Units

Test Print Command

GS ( A pL pH n m: Execute Test Print

Executes a test print based on paper type and content selection.

Maintenance Counters

GS g 0 m nL nH: Initialize Maintenance Counter

GS g 2 m nL nH: Transmit Maintenance Counter

Chinese Character Print Modes

FS!n: Set Print Mode(s) for Chinese Characters

Chinese Character Set Management

FS & Select Chinese Character Mode

User-Defined Chinese Characters

FS 2 c1 c2 d1...dk: Define User-Defined Chinese Characters

Defines user-defined Chinese characters.

Chinese Character Systems and Spacing

FS Cn: Select Chinese Character Code System

Quadruple Size and HRI Characters

FS W n: Turn Quadruple-Size Mode On;Off for Chinese Characters

GS H n: Select Printing Position for HRI Characters

Barcode Font and Height

GS f n: Select Font for Human Readable Interpretation (HRI) Characters

GS h n: Select Bar Code Height

Selects the height of the bar code.

Barcode Printing Commands

GS k m d1...dk NUL; GS k m n d1...dn: Print Bar Code

Prints various types of bar codes with specified parameters.

Barcode Width and 2 D Code Types

GS w n: Set Bar Code Width

Sets the horizontal size (width) of the bar code.

GS Z n: Select 2-D Code Type

Selects the type of 2-D code to be printed.

2 D Barcode Printing

ESC Z m n k dL dH d1...dn: Print 2-D Bar Code

Prints 2-D bar codes with specified parameters.

GS k m v r d1...dn NUL; GS k m v r nL nH d1...dn: Print 2-D Bar Code