10
RAUTOOL A-LIGHT2
USING THE TOOL
1. When changing the compres-
sion jaws, always rst push
the long compression jaw and
then the short one onto the tool
cylinder.
3. By rotating the tool cylinder,
the compression jaw can be
brought into the correct working
position.
2. Fix the compression jaws with
the pins.
Ensure the identical alignment
of the double jaws (for example,
size 25 mm). Always push the
pins in all the way.
4. To insert the battery, push it
completely into the holder until it
locks into position on its own.
To Next Page
Loading...
