Need help?Do you have a question about the REI SD-300 and is the answer not in the manual?
General| Brand | REI |
|---|---|
| Model | SD-300 |
| Category | Measuring Instruments |
| Language | English |
Illustrates the SD-300 system diagram with connected components.
Guides the user through initial system configuration and network connection.
Provides crucial safety warnings before performing installation procedures.
Details the wiring connections for power and camera cables.
Outlines the physical dimensions and mounting bracket options.
Stresses checking local guidelines before modifying vehicle structures.
Provides recommendations for optimal camera mounting locations.
Explains how to power on the SD-300 and initiate recording.
Details the procedure for safely powering off the SD-300.
Provides an overview of the advanced setup options available.
Details the subcategories within the system setup menu.
Guides configuration of the system's date and time settings.
Allows selection of how the SD-300 starts and stops recording.
Configures fault indicators, beepers, and display options for system alerts.
Allows setting of local, remote, installer, and SD card passwords.
Explains the purpose and use of the SD card password for evidence integrity.
Allows configuration of camera settings like resolution, frame rate, etc.
Guides the user through upgrading the system's firmware.
Resets all system settings to factory default configuration.
Allows configuration and calibration of the accelerometer.
Introduces the network setup options: LAN, Server, and WiFi.
Configures wireless network connection settings like SSID and security.
Contains logs for diagnosing system problems and errors.
Allows searching system logs by event type, start/end date and time.
Describes how to access and use the web-based interface for remote monitoring.
Lists detailed technical specifications for the SD-300 unit.
To Next Page
