Need help?Do you have a question about the REI TALAN 3.0 and is the answer not in the manual?
Details how to charge the TALAN battery and manage power.
Instructions for updating the TALAN software and firmware.
Explains the use of the touch screen and physical keypad for operation.
Describes how information is presented on the TALAN display.
Details the various input ports, connectors, and their functions.
Explains the switching matrix and options for selecting test pairs.
How to save test data to USB drives or Compact Flash cards.
Procedures for creating jobs, defining locations, and targets for testing.
Steps to define and manage sequences of tests for a job.
Discusses different points for testing phone lines.
Explains VoIP cable types and the use of the VoIP Test Adapter.
Defines testing conditions and outlines an efficient test sequence.
Compares operation modes and details test type configuration.
Covers saving, recalling, and saving to target for manual tests.
Detailed guide to DMM functions, including shield and earth ground tests.
Comprehensive guide to analog, digital, and advanced audio tests.
Detailed explanation of NLJD for tap detection and harmonic analysis.
Covers VoIP overview, adapter usage, packet analysis, and filters.
How to apply line bias and perform A/B test comparisons.
Explains HLP controls, operational modes, and service routines.
Describes HLP indicators, battery status, and headphone connection.
Details the control system, I/O, user interface, and RF system specs.
Covers Digital Multimeter, Bias Generator, Audio, and Power System specs.
Lists mechanical dimensions and Harmonic Locator Probe specifications.
Control System| primary computer | 32 bit RISC processor, 520 MHz |
|---|---|
| internal memory | 64 MB SDRAM (OS), 64 MB Flash |
| external memory | Compact Flash Type III, USB mass storage |
Digital Multimeter| sample rate | 500 msec |
|---|---|
| AC/DC volts | 0 to 250V Maximum |
| AC/DC current | 0 to 300mA Maximum |
| resistance | 0 to 42MΩ |
| capacitance | 50pF to 40µF |
Power System| external input | 15VDC @3A |
|---|---|
| universal power supply | 100-240VAC, 50-60Hz |
| removable battery | Rechargeable Lithium ion, 4-hour runtime |
Mechanical| dimensions | 10.0 in x 12.9 in x 2.7 in (25.4 cm x 32.8 cm x 6.9 cm) |
|---|---|
| weight with battery | 6 lbs (2.7 kg) |
| case dimensions | 5.4 in x 14.9 in x 19.5 in (13.7 cm x 37.8 cm x 49.5 cm) |
| loaded case weight | 19.0 lbs (7.1 kg) |
| operating temperature | 0°C to +50°C |
Harmonic Locator Probe| operational frequency | 225 kHz & 450 kHz |
|---|---|
| antenna type | Balanced Loopstick |
| headphone audio output | 16Ω, 105dB SPL limited |
| battery | 9V Alkaline |
| run-time | 10 hours average, 22 hours (headphones) |
| size | 17.5 in x 1.5 in (44.45 cm x 3.8 cm) stored, 63.75 in x 1.5 in (162 cm x 3.8 cm) fully extended |
| weight | 1 lbs (.5 kg) |
To Next Page
