TESTING CONCEPTS AND RECOMMENDED TEST SEQUENCE
22
Automated Sequencing and Manual Operation
The TALAN has many test functions that can be performed in either an Automated Sequence
Mode or Manual Mode. The main difference is that the Automated Sequence Mode is designed
to walk the user through the previously recommended test sequence while the Manual Mode is
designed to allow the user to go to any specific tests and completely control the parameters
and conditions of the tests. Manual Mode is most useful for testing for specific items of interest
while the Automated Sequencing is recommended for a complete evaluation of the line. In both
modes, the testing screens are very similar; however, the Automated Sequencing Mode test
screens have a green background while the Manual Mode test screens have a brown
background.
This section will describe how to utilize the Sequence mode. However, the details of the actual
tests being performed will be described later as Manual Tests functions.
To Next Page
Loading...
Need help?
Control System
