2 Safety
10 5972470/01 EN
This technical document contains detailed descriptions on the safe and
proper installation, connection, commissioning and monitoring of the prod-
uct.
▪ Read this technical file through carefully to familiarize yourself with the
product.
▪ This technical file is a part of the product.
▪ Read and observe the safety instructions provided in this chapter in partic-
ular.
▪ Observe the warnings in this technical file in order to avoid function-re-
lated dangers.
▪ The product is manufactured on the basis of state-of-the-art technology.
Nevertheless, risks to life and limb for the user or impairment of the prod-
uct and other material assets may arise in the event of improper use.
2.1 Intended use
The oil level indicator displays the oil level of the transformer's oil conserva-
tor. The product is designed solely for use in stationary, industrial, large-
scale electrical energy systems and facilities. If used as intended and in
compliance with the requirements and conditions specified in this technical
document as well as the warning notices contained in this technical docu-
ment and attached to the product, the product does not pose risk of personal
injury or damage to property or the environment. This applies throughout the
entire service life of the product, from delivery, installation and operation to
removal and disposal.
Intended use refers to the following:
▪ Use the product only with the transformer specified in the order.
▪ Operate the product in accordance with this technical document, the
agreed-upon delivery conditions and the technical data.
▪ Ensure that any necessary work is only performed by qualified personnel.
▪ Use the equipment and special tools supplied solely for the intended pur-
pose and in accordance with the specifications of this technical file.
2.2 Fundamental Safety Instructions
To prevent accidents, disruptions and damage as well as unacceptable ad-
verse effects on the environment, those responsible for transport, installa-
tion, operation, maintenance and disposal of the product or parts of the prod-
uct must ensure the following:
To Next Page
Loading...
Need help?
General
