REIZEN 704066 User Manual

1
Instruction Manual
Reizen Atomic Radio-Controlled USB-Charge Analog Talking Watch
(USA-Euro Multi-Band)
#704066
Your Atomic USB-Charge Analog Talking Watch is a multi-band, radio-controlled
watch. It is able to pick up a time-setting signal from the USA (excluding Alaska and
Hawaii), UK, GERMANY, and JAPAN (60 KHz only). Wherever there is no accessible
atomic signal, the time is easily set manually.
Your watch is time-synchronized to the Atomic Clock (which measures each
second of time as 9,192,631,770 vibrations of a cesium 133 atom in a vacuum) and gives
time, which is accurate to 1 second every million years. Your radio-controlled watch
even accounts automatically for daylight saving time (when applicable).
Automatic Time Setting
Your talking radio-controlled watch receives a user-selected Atomic Clock signal
automatically at 3:00 AM every night. After reception of signal it will show the official
local time on the watch. Everything is done automatically. However, your watch can
also be set manually.
Button Functions:
S1
● Press S1 (2 o’clock button) to announce Hour and Minute
● Press S1 two (2) times to announce the Date
● Press S1 three (3) times to announce reception status
NOTE: If time signal reception was successful, the watch will say “[Country Name]”
followed by “Time Updated.” If signal reception failed, the watch will say “[Country
Name]” followed by “Time Not Updated.”

REIZEN 704066 Specifications

General

Brand	REIZEN
Model	704066
Category	Watch
Color	Black
Display	Digital
Display Type	LCD
Alarm	Yes
Stopwatch	Yes
Backlight	Yes
Battery Type	CR2016
Type	Digital
Features	Alarm
Water Resistance	3 ATM

Summary

Automatic Time Setting

S1 Button Functions

Explains functions for the S1 (2 o'clock) button, including time, date, and status announcements.

Button and Crown Operations

S2 Button Functions

Details functions for the S2 (4 o'clock) button, including alarm check and power level.

Crown Operation

Explains the function of the watch crown for resetting hands.

Battery Management

Battery Power Level Check

Instructions on how to check the watch's battery power level via second hand position.

Low Battery Alert

Describes the audible alert for a low battery status.

Charging and Signal Reception Setup

How To Charge Watch

Step-by-step guide for charging the watch using a USB cable.

Correct Watch Positions For Time Signal Radio Reception

Guidance on optimal watch placement for receiving time signals.

Country Signal Selection

Selecting USA, UK, Germany, or Japan Signal

Process to choose the desired radio time signal country.

Manual Operation and Alarm Setting

Manual Signal Reception

Steps to manually initiate the time signal reception process.

Setting Daily Alarm

Instructions for setting a daily alarm on the watch.

Alarm, Chime, and Manual Time Settings

Turning Alarm ON/OFF

How to enable or disable the daily alarm function.

Hourly Time Announcement (Chime) ON/OFF

How to activate or deactivate the hourly time announcement feature.

Manual Time Setting (for country without time signal)

Guide for manual time setting in regions lacking radio signals.

Time Setting and Sleep Mode

Set Time

Detailed procedure for manually setting the watch time.

Setting Watch To Sleep Mode

How to put the watch into a low-power sleep mode.

To Wake Up Watch

Instructions for activating the watch from sleep mode.

Troubleshooting and Maintenance

Reset Watch Hands

Procedure to reset the watch hands to the correct 12:00:00 position.

Reset Watch To Atomic Radio Signal

How to reset the watch's radio signal reception.

Watch Not Receiving Time Signal

Explains common reasons for failing to receive time signals.

Replacing the battery

Information regarding the non-user-replaceable battery.

Post Battery Replacement and Warranty

After Battery Replacement

Steps to follow after replacing the watch battery, including time zone setup.

Manufacturer's Limited Warranty

Details the product warranty terms, service information, and contact details.